Bike Coach Archives - Page 18 of 20

Sep 06 2018

Performing 8-Second “Zoomies” with 6-Second Recoveries to Achieve Fitness Breakthroughs

This is a short video of several clients at the studio performing Intervals called "Zoomies". Zoomies are 8-second intervals, with just 6 second recoveries. We performed FORTY of these in 3 sets. The goal is to ride the 8 second intervals at a relatively high intensity, maybe 150-200% of Threshold. Then the cyclist spins through a short recovery. I used it on Tuesday, and multiple cyclists achieved breakthroughs on Xert. I'm using it today as well, to similar effect.

Here's how to make them work for you.

Become a subscriber and get access to this post and our entire coaching library, all for less than the cost of a movie ticket. Click here to learn more.

Already a subscriber? log in

Jun 24 2018

Afraid To Suffer, Part Two: Breaking Through

Our story so far:

I met with this individual, after they signed up for Xert. I helped them program the head unit.

I explained the concept of volume, intensity, frequency, Focus, and fitness breakthroughs.

For TEN WEEKS, this individual’s numbers JUST. KEPT. DROPPING.

I couldn’t figure it out. Until Finally, it dawned on me to try ONE MORE THING.

It's all about the difference between Suffering and Suffering. And here's how we made it work.

Become a subscriber and get access to this post and our entire coaching library, all for less than the cost of a movie ticket. Click here to learn more.

Already a subscriber? log in

Jun 24 2018

Afraid to Suffer, Part One

“I’m not getting any better!” (You don’t know how to Suffer!)

Descending Threshold — Let’s get to the root of this.

I HATE that statement. “Better” is a completely loaded term. It implies perception over analysis, and it’s my job as a coach to be a shrink, a cheerleader, a gentle critic, a cajoler, and an overall positive influence. But what is NOT my job, is to DO THE ACTUAL WORK ON THE BIKE. YOU have to learn how to SUFFER!

I have a client. Low overall Threshold, REALLY low overall HIE, and what I’d call an ARTIFICIALLY low Peak Power. I KNOW this client can do better. But this individual, and I’m going to be harsh here…. This individual DOES NOT KNOW, AND DOES NOT UNDERSTAND, HOW TO REALLY, TRULY, DEEPLY — SUFFER.

Xert Signature Descending — “I Can’t Understand Why I’m not A Stronger Cyclist!”

Do the Work – Reap the Reward. Suffering is GOOD at times.

Training requires WORK. You USE ENERGY to GENERATE WATTS, and thus – GET FIT. FITNESS gives you the ability to use MORE energy, and generate MORE WATTS, and thus – GET MORE FIT!

But when you don’t DO THE WORK, you don’t GENERATE the POWER, and your FITNESS STAGNATES. It really is that simple.

Fitness equals Work divided by Power times Time. — Do the Work, Reap the Reward.

This individual has everything; Great job, two great kids, expensive bike, extravagant components, custom wheels, Rapha Kit that gets replaced when bike grease inevitably shows up on a jersey pocket. The works. But what this person DOES NOT HAVE, is the ability to SUFFER!

Suffer Watts — Sometimes you forget where you put your shoes….

I tell my clients – “You have to suffer like a barefoot Russian in winter!” Hey – they beat Napoleon! You can, too!

Well, there’s a time to suffer; it’s called interval days and it’s meant to be a controlled, “Focused” intensity. Do the work, reap the reward. But some people just…… either don’t want to, or don’t understand just how hard “Work” really is.

“Volume IS Work! It’s not ALL SUFFER(ing!)”

I met with this individual, after they signed up for Xert. I helped them program the head unit. I explained the concept of volume, intensity, frequency, Focus, and fitness breakthroughs.

For TEN WEEKS, this individual’s numbers JUST. KEPT. DROPPING.

I couldn’t figure it out. Until Finally, it dawned on me to try ONE MORE THING.

Click here to see The Breakthrough in Part Two (Premium Content—subscription)

May 26 2018

Four Weeks

A NEW OPPORTUNITY TO APPLY XERT

On April 25th, 2018, I received an email from a past client. Joe had mostly come to the Cycling Center Dallas Studio for weekend FLASH rides, when the weather was too poor to ride outdoors. He was always a good cyclist, but beyond the 2 hours here and there, I did not know much about his ability as a cyclist or a competitor. Joe had not been to my studio recently enough to learn about my infatuation with Xert, the cycling fitness assessment model that has led my clients to such recent success.

“Can you get me ready for ‘Bike the Bricks’?”

BIKE THE BRICKS

Bike the Bricks is a Criterium bike race, held on the Friday of Memorial Day weekend, in McKinney, Texas. It is usually the first day of up to five days straight of bike racing. Bike the Bricks, however, is the most popular and exciting, as it winds it’s way through a bootleg-shaped course, in the middle of downtown McKinney. It’s VERY spectator-friendly.

Four weeks is a really short time to prepare ANYONE for a competitive event, but I had another idea in mind.

“Maybe? What type of Power Meter do you have?”

“A new Quarq.”

“Excellent. What type of head unit do you use?”

“I have a Garmin 520.”

“Okay – let’s meet and assess your current training values, and then let’s chat about the best strategy to take so you’re best prepared.”

ASSESSMENT AND TRAINING – NO, ASSESSMENT AND TEACHING XERT!

Now, anyone who has ridden or trained for a bike race knows that unless the athlete is already somewhat fit, not even a miracle can leave them prepared for the demands of a bike race, in such a short period of time. Yet I had a different idea in my head; if I could use the information offered up through Xert, then we could help the athlete BETTER UNDERSTAND his fitness, the dynamics of the race, when and how to attack, bridge, or recover, and even when a breakthrough might occur or be appropriate.

Xert Intervals Tabata — *Joe Gonzalez Performing his first Set of Tabata Intervals using Xert.*

Per my directions, the athlete showed up early, got a proper warmup, and using his verbal claim of Threshold/Critical Power, I plugged him in to PerfPro Studio, and gave him some of my nastiest intervals. Then, his Xert Fitness Signature was properly set. Over the next three weeks, I looked at the information that his power meter and head unit provided. It gave me the ability to better understand his fitness. I was better at planning the strategy of the workouts. Finally, I was better at helping him understand just what the head unit was telling him, through the use of the Xert Fields.

Xert Intervals With Tabatas (Click to Watch Video)

Ironically, the traditional fitness signatures used by Xert DROPPED over the next three weeks…

Xert Fitness Signatures CAN and DO DROP as you change modes for different Focus. In this case, the cyclist changed his focus from Road Racing (Breakaway Specialist or Rouleur) to Crit Racing (Pursuiter or Puncheur), It also means he was just not as FOCUSED as he perhaps could have been earlier in the season.

FINDING THE MOST ACCURATE FITNESS SIGNATURE

Now, an athlete might believe that this was a sign of less fitness. However, I believe it was a sign of a MORE ACCURATE FITNESS SIGNATURE! He DID achieve fitness breakthroughs, but the Xert Signatures, which used data from his winter and spring training, was tuning itself to the short, hard intensity intervals that I was providing the athlete.

On the Tuesday before the race, I had the client come in for a final Fitness Signature Assessment. The result?

FITNESS Breakthrough Xert Gold Medal — *Knowledge of HOW to time your intensity can lead to FITNESS BREAKTHROUGHS!*

Xert Fitness Breakthrough — *NICE SIZED BUMP IN PERFORMANCE AND FITNESS CAPACITY – But even MORE important – KNOWLEDGE!*

A GOLD MEDAL, and a final fitness signature that looked like this:

Peak Power: 1227 Watts
High Intensity Energy (HIE): 21.7 KiloJoules
Threshold Power: 270 Watts

DISCUSSION ABOUT HOW TO APPLY XERT IN THE RACE

Additionally, armed with this knowledge, and confident that it was accurate, the athlete and I then discussed how to use it in the upcoming race.

We used ONE FIELD – Watts/MPA.
When Watts turned black, he was above Threshold, at 270-383 watts.
Above 383 watts, his watts were YELLOW, and he was on BORROWED time.
If watts turned RED, he was above 770 watts when fresh, and he would not be able to sustain this power for more than 30 seconds.
As the race wore on, fatigue set in, and MPA dropped, he could expect the colors on watts to turn yellow and red at LOWER intensities.
He was to try and avoid a breakthrough for at least the first half of the race, and hopefully marshall his resources so he could use them in the last few laps, or at the finish.
IF he saw yellow watts for too long, he should back off, and try to find a wheel to draft behind.
If he was fresh, and the pack was slowing, he could take risks, or attempt a breakaway.

To sum it all up; it all depended on the color of the watts, and the MPA values. He had learned that MPA was the key; if it dropped, he was riding VERY hard. If it rebounded, he was recovering. HE could make the race. Armed with this new knowledge, HE could attack, bridge, recover, lead out – anything. It was HIS fitness that mattered, not the random surges and recoveries of the Peloton.

Next, we discussed hydration, staying cool in the heat and humidity, diet, carbo-loading, and teamwork, and I sent him off with my usual “Good Luck, but you don’t need it! YOU HAVE SKILL AND TALENT AND KNOWLEDGE! USE THEM!”

RESULTS

Unfortunately, I left the next day to attend a wedding in Northern Wisconsin, and was unable to attend the event itself. Because of poor cell coverage, I waited all day Friday for a text, and finally, in the late evening, it arrived.

Bike the Bricks Mens 40+ 2018 — *Results – 13th Place – his strongest finish ever!*

13th Place, 40 finishers, 80 starters, and 2nd teammate of his club.

Because of this KNOWLEDGE and APPLICATION, he had finished with the leaders. Joe had survived and done his part to activate the race. As a result, an Xert novice had used his knowledge on-screen and in the event, to help himself and his teammates. The cyclist had also achieved another breakthrough.

Notice the SUPPRESSED MPA that then got DEPRESSED right at the mid-point? THAT was where the breakthrough happened, and it coincided with an attempt at a Prime. The rest of the race was relatively easier. “Relative” being the key word.

There was no way that we could expect a podium. Thus, Four weeks of training had led to greater knowledge. It had not, however, been adequate to boost Anaerobic Capacity, or HIE to a significant degree. Perhaps more importantly, it led to a SMARTER RACER, and a SMARTER RACE. I think that’s my most profound observation. The athlete, using Xert Fields and Fitness Signatures, was better able to RACE THE RACE, within his limits. He may not have been the most fit athlete out there. But he WAS the SMARTEST racer he could be, at that moment.

CONCLUSION

For all the reasons I’ve mentioned above, I continue to be amazed. I am convinced that the Xert fitness signature and modeling are the most accurate system available. I’ve tried them all, I’ve used them all, and my athletes are now using Xert to greater and greater effect. You don’t have to be a racer to enjoy Xert’s fitness benefits. Understanding the fields, and the system behind those numbers, is very, very powerful. Perhaps most importantly, with this athlete in particular, we now know exactly where his strengths and weaknesses are. We will be addressing them throughout the summer. When the Fall Crits or the State Championship roll around, he will be even more prepared and confident in his fitness and capacity.

May 11 2018

MMP (Mean Maximal Power) Breakthroughs Galore in April!

Testing for Mean Max Power (MMP)

I’ve been meaning to write about this for a while, so apologies that it’s a few weeks late. However, our training in March and April led to multiple Mean Maximal Power Breakthroughs, and I wanted to write about this. Mean Maximal Power is defined as the “Highest average power” you can generate over a given amount of time. This time, at the studio, we used 5 MMP’s. They were: 1-minute, 2-minute, 3-minute, 5-minute, and 8-minute efforts. This was done over two days, and we did “Pre-Tests” the week before for the 3-minute and 8-minute values, and we accepted the higher value of the two. All tests were performed using PerfPro Studio software, and several of my clients are using Xert Fields on their Garmin head units.

We test for Critical Power at the studio, because not all of our clients own power meters for their bikes. PerfPro Studio is the best program to help cyclists understand how intervals work. Intervals on PerfPro incorporate Critical Power and W Prime. Intervals of different intensities, durations, and number, improve fitness.

Most of my clients are veteran studio cyclists, so when we tested, we used previous values as a benchmark to surpass. Here is an example:

Critical Power Curve Cycling Center Dallas Online Bike Coach MMP — Leo Spencer’s MMP Numbers and Critical Power for April 2018

In March of 2018, Leo Spencer had Mean Maximal Power Numbers for the following durations:

1MMP – 418 watts
2MMP – 309 watts
3MMP – 292 watts
5MMP – 268 watts
8MMP – 237 watts

As a result, this led to a Critical Power Value of: 214 watts, and a “W Prime“, or “W'” value, of 13,010 j. Critical Power is a value above which a cyclist is drawing from anaerobic power sources, and it cannot be sustained for long periods of time. Below Critical Power, a cyclist is largely using aerobic power, and the effort can be sustained much longer. The W Prime (W’) value is sort of a “bank account”, from which energy is drawn and returned, when wattage is above Critical Power. If Leo were to ride at 300 watts, his W Prime (W’) would fall quickly. When his power was at 150 watts, it would begin to return.

Furthermore, you can also see that most of Leo’s values came from one day in March, with one day in February completing the 5 MMP’s.

This was in the middle of a “MesoCycle” of training. Mesocycles are periods of time where a cyclist is increasing training volume and/or intensity. Four weeks later, after an increase in intensity, the installation of a power meter and a Garmin 1000 head unit, along with the introduction of Xert Fields and Metrics, we tested him again.

Testing after four weeks of Progression

Here are his charts…

Mean Maximal Power PerfPro Studio Xert Breakthroughs — Leo Spencer Critical Power Test for Mean Maximal Power in the 5, 3, and 1 minute durations.

The 5-minute, 3-minute, and 1-minute MMP Tests yielded:

1MMP – 461 watts (10% improvement).
3MMP – 304 watts (4% improvement).
5MMP – 278 watts (4% improvement).

Here is his 2-minute and 8-minute MMP Test chart:

Mean Maximal Power Critical Power Test PerfPro Studio Xert — Leo Spencer 8 Minute and 2 Minute MMP Test May 2018

The 8-minute and 2-minute MMP Tests yielded:

2MMP – 372 watts (17% improvement).
8MMP – 249 watts (5% improvement).

His Critical Power Curve ended up looking like this:

PerfPro Studio Critical Power Test May 2018 MMP Xert — Leo Spencer Critical Power Test May 2018

These Mean Maximal Power Improvements led to more overall fitness for Leo and many others. In fact, 3/4 of my studio clients achieved breakthroughs in at least 3 of the 5 MMP’s!

Here are Leo’s Gains by %.

Critical Power: 2% in four weeks.
W Prime (W’): 25% in four weeks!!!!

The Secret Behind the MMP Breakthroughs…

So here is what I find so interesting.

Before Xert, I would give cyclists their previous MMP Records. Leo got his April Mean Maximal Power values, to try and break. But the method of breaking the MMP records was what made it so successful.

Leo and all the riders who use Xert, used COLORED ZONES to better pace their efforts. Watts colored in Black are at Threshold Intensity. Power showing watts in Yellow were at Vo2 Intensity. Watts colored Red were highly Anaerobic, and if the watts turned Purple for a long enough period of time, then a breakthrough could be achieved! By timing the efforts JUST RIGHT, Xert users were able to “See” how much more they could give, before they surpassed previous limits. Leo’s breakthroughs were all performed visibly as well as mentally.

Therefore, in PerfPro, the chart looks like this (this is from March, 2018):

Wattage Pulls metabolic Efficiency — It never pays to go out too hard, too early. ALWAYS work on raising your intensity over time, and with that rise, come breakthroughs!

And here is Leo’s file from Xert’s point of view…:

Xert MMP Breakthroughs — The MMP breakthroughs at 5,3, and 1 minute.

Conclusion

In conclusion, Mean Maximal Power is a way to test yourself for work capacity. Using PerfPro, we can accurately look at empirical records to set breakthrough goals. When combined with Xert Fields, cyclists can better pace their way to breakthroughs. Using PerfPro Studio with Xert Fields on your Garmin, is truly the best combination available.